Skip to content
Sheffield G Collections
Bag

Leather Clasp Jackets

83 jackets on the rail One of each. No restock.

Showing 25-48 of 83

Vintage Leather Clasp Jackets in the UK

A clasp jacket is defined by its fastening, not its shape. Instead of a zip pull, the front closes with hinged metal hooks or toggles that snap across the chest, usually over a concealed centre zip. They are often called fireman clasps, after the fire service coats the design was taken from. On the right jacket they read as hardware jewellery.

Buying one second hand is effectively the only route, because the fastening has all but vanished from new production. It also crosses every cut rather than defining one: hooks and toggles were fitted to bombers, field jackets, cafe racers, biker cuts and harringtons alike. Expect full fireman clasps in silver and chrome, brass hooks, decorative toggles, ornate multi-clasp arrangements, and slim single-clasp tabs alongside a normal zip.

Why buy a leather clasp jacket from Sheffield G

  • Every jacket is one of one, in a single size. No restock. When it sells, the page goes dark.
  • Checked by hand at our Doncaster office before listing, hinges and hooks included, then measured, graded, photographed, packed and posted from there.
  • One condition grade only, Very Good: structurally sound, working hardware, sound lining, professionally cleaned and conditioned.
  • Measured flat with a tape and photographed. Nothing edited to hide wear.

Fireman clasp leather jacket

The full fireman arrangement is the one people picture: a column of hinged hooks running down the front, each catching a fixed bar opposite. It is a two-stage closure. The zip underneath seals, the clasps sit over the top, and that is why the front stays flat, not gaping between fastenings. Look closely at the hinge pins in the photographs: that is where wear shows first.

Silver, chrome and brass clasp hardware

The metal changes the whole jacket. Silver and chrome read cooler and sharper, the strongest contrast against black. Brass warms brown and burgundy hide, and dulls with age rather than staying bright. None of it is polished up for the photographs, so what you see is what arrives.

Black, brown and burgundy clasp jackets

All three colours run through this rail, and the pairing of colour and metal matters more here than on a plain zip jacket, because the hardware sits where the eye lands first. Black with chrome is the hardest, most graphic version. Brown with brass is the quietest. Burgundy sits between the two and shifts a lot under different light, worth knowing when buying from photographs. To see that colour across every cut we hold, try the burgundy leather jacket collection.

How a clasp jacket should fit

A clasp closure is less forgiving than a zip: the hooks are set at fixed intervals and cannot be eased. If the chest is tight, the leather between them pulls into visible spokes and the hardware stands proud. It should close flat, hooks lying against the leather, no strain at the hinge. Allow room for a jumper if you wear one underneath. The cut decides the rest of the fit, and older blouson and hybrid shapes sit in the classic leather jacket collection.

How to get the size right

Vintage labels are ignored here: a label size from one era means nothing in another. Every jacket is measured flat: chest pit to pit, shoulder, sleeve, length and waist. The size letter comes from the pit to pit figure, not from anything sewn in. 17in or less is XS, 18 to 19in is S, 20 to 21in is M, 22 to 23in is L, 24 to 25in is XL, and 26in or more is XXL. Double the pit to pit for the chest measured around, then read the guide to measuring a leather jacket for where to lay the tape. Leather softens and moulds with wear but never gains inches across the chest, so buy the measurement, not the stretch.

Browse the leather clasp jackets

Every jacket here is a single garment in a single size, so the rail turns over constantly. UK delivery is free and orders are dispatched within 3 business days. If the measurements match, take it: clasp fronts are the hardest thing here to find twice.

Questions, answered

A fireman clasp is a hinged metal hook fastening, copied from fire-service coats, that snaps shut across the chest in place of a visible zip pull. On most leather clasp jackets a row of silver or brass hooks closes over a concealed centre zip, so the clasps carry the look while the zip keeps the weather out. The style turns up across bombers, harringtons, cafe racers, biker and field jackets, and on the right garment the hardware reads as jewellery.

A leather clasp jacket must close comfortably across the chest now, because the hooks sit at fixed points and the fastening itself has no adjustment in it. That makes the flat pit to pit on the listing the number to trust: double it for the around-chest measurement and compare it against a jacket you already own. Leather softens and moulds with wear but never gains inches across the chest, and the shoulder still matters most. Our page on how to measure a leather jacket covers the compare-at-home method.

Every clasp is checked before a jacket is listed, and any broken hook, hinge or popper is replaced, so the fastenings work as they should. That is part of our Very Good grade, hardware must be fully functional or the jacket is not listed at all. Expect honest signs of age instead, a softened shine on high-wear leather and a mellowed tone on older brass. That is character, not damage.

Almost nobody makes clasp-front leather jackets new. The hinged hook fastening fell out of mainstream production decades ago, so finding one usually means combing the second-hand market. Ours are sourced, restored and listed one at a time, across every cut from bomber and harrington to cafe racer and field, each a single garment in a single size. Every one is measured flat and photographed with nothing edited to hide wear, and when it sells the page goes dark. If you are torn between two, message us first for honest advice.